nitrous on stock converter
Thread Starter
Teching In
Joined: Jul 2006
Posts: 15
Likes: 0
From: fl
nitrous on stock converter i plan on running a nx nitrous 150 shot on my 98 ss, i was told to get a converter preped with anti-baloon plates but i was just wondering how many of you guys have run a nitrous on stock converter. any opinions would help
thanks, chris
thanks, chris
I ran nitrous on my stock converter for 2 years until my tranny lost 3rd, so i put a fuddle 3,600 in with my new tranny, love the converter but still havent had better times than my stock one on the bottle, motor passes picked up 6-7 tenths. I always spray off the line with no controller, like hard hit and 60fts.
Thread Starter
Teching In
Joined: Jul 2006
Posts: 15
Likes: 0
From: fl
Originally Posted by juicedls1
I ran nitrous on my stock converter for 2 years until my tranny lost 3rd, so i put a fuddle 3,600 in with my new tranny, love the converter but still havent had better times than my stock one on the bottle, motor passes picked up 6-7 tenths. I always spray off the line with no controller, like hard hit and 60fts.
just a lid, catback, throttle body spacer, and 3.73 gears. Dynod 282hp and 292 torque, without a tune on motor, and 360hp and 362 torque on the spray without tune. They are weak numbers but that dont matter your timeslip matters. Have you ever ran ot dynoed yours?
Thread Starter
Teching In
Joined: Jul 2006
Posts: 15
Likes: 0
From: fl
it dyno at 335hp @ 347 trq. with a lid, lt headers, and ory and its an a4 so i dont know if thats right for a camaro ss thats an a4? never have taken it to the track. what did you run in the quarter mile? also do you know what nitrous kits are rated at the wheels?
