Davy_Baby9

iTrader: (23)

I am currently building a ls6 that will be finding its way into my 91 S10 RCSB 2wd. I want to use the 700R4 that was in it so putting it back together would be so much easier. Anyway, I have been searching for descent rebuild kit for the 700R4 and ran across this one that looked promising.

Rebuild Kit

So does that look like it could handle 400-450RWHP and spin up to 7000rpm? I need some help people, transmission's are not my area.

6techniques

iTrader: (7)

If trannys arent your area, why are you looking at a rebuild kit? You should probably hop on the phone with one of the sponsors to see what they have to say.

Davy_Baby9

iTrader: (23)

I work at a GM dealership and one of the tech's are going to rebuild it for me. He just told me to get something that can handle the power. So I started looking around and thought I would ask you guys first.

performabuilt

iTrader: (25)

Do some reading about clearances etc though there may be some good info in that kit , theres a considerable difference between a stock rebuild and how clearances are set and performance ,And many tricks to them.