dd stall question
Thread Starter
Teching In
Joined: Feb 2007
Posts: 1
Likes: 0
dd stall question hi all I recently just switched over from mustangs to working on a ls1 4l60e rx-7 build. And have a converter question.
I am looking at the yank converters but I am not sure what stall speed to use for a 100% daily driver, with 3.90 or 4.10 gears, on a 2700ish pound car?
would a 3200 be a good choice?
I am not planning any extreme cams, but I am looking into H/C/I on my stock ls1
I am looking at the yank converters but I am not sure what stall speed to use for a 100% daily driver, with 3.90 or 4.10 gears, on a 2700ish pound car?
would a 3200 be a good choice?
I am not planning any extreme cams, but I am looking into H/C/I on my stock ls1
Last edited by masterjackal; Feb 9, 2007 at 03:59 PM.
I have heard good things about yank but no experince with them. I have heard great things about the yanks 3600. I have a 3600 vigilante though. 
that might help you or pm yank they are a sponsor.
that might help you or pm yank they are a sponsor. Last edited by 02sleeperz28; Feb 9, 2007 at 04:12 PM.