alright, well the engine building is done....now time for the drive, right? WRONG. My car will not move and here and the symptoms:

1) "brake" and "abs inop" lights both lit on the cluster
2) when i put the car into a gear, (reverse, drive, etc) the rpms dont dip..and the car goes nowhere.
3)I removed the coolant line from the tranny to the radiator and got no fluid.

the transmission is brand new...could I have already broken the pump?
any suggestions about the cluster lights?

i should also mention there are only EGR codes, nothing related to the tranny.

thanks

 

btw, its my friend's car
he was able to push it 6" so far
he will try again

 

the pump sounds like its junk.

 

Well if you have no fluld coming out of the lines with the car running then unfortunatly you somehow likley broke the pump you will need to pull the trans , ussually it happens when the converter is not fully inserted during installation

 

he forgot to mention the pump isnt pumping??

 

Well as i mentioned above most likley it was broken during installation its the most comon installation error and pretty much any time you hear some one say installed a new transmission and it wont move at all thats what has happened unfortunatly