Transmission Bushing????
Thread Starter
Teching In
Joined: Oct 2005
Posts: 5
Likes: 0
From: Humble, TX
Transmission Bushing???? Hi i recently got my 4L60E rebuilt, and the guy who rebuilt it advised me to replace the "Bushing that sits on the back end of the transmission where it connects to the Torque Arm" thats the best description i can think of. he told me the name but i can no longer remember... If anyone can tell me the exact name of the part and where maybe i could find a Performance version of it so it will hold up. Thanks....
That would almost have to be the tail housing bushing. Most transmisson shops will have some spares sitting around. A lot of shops don't replace them on a stock rebuild because they don't usually have very much wear.
Actually i was thinking the torq arm bushing .But he may have been talking the tail housing bushing also
__________________
Ask the guy who rebuilt your trans, which bushing he's talking about. If your builder was talking about the tailshaft bushing, change it out soon since it can crack your tailshaft, happened to me 
Now I have a polyurethane one in it's place. Here's what the tailshaft bushing looks like:
And here's the torque arm bushing
Both are on Speedinc's website in the transmission section.
Now I have a polyurethane one in it's place. Here's what the tailshaft bushing looks like: And here's the torque arm bushing
Both are on Speedinc's website in the transmission section.
TECH Senior Member
Joined: Apr 2002
Posts: 6,080
Likes: 17
From: So.Cal.
The top pic is the transmission mount.
The tailshaft bushing looks like a cylindrical metal sleeve.
The bottom pic is the torque arm bushing (as stated).
The tailshaft bushing looks like a cylindrical metal sleeve.
The bottom pic is the torque arm bushing (as stated).
Last edited by joecar; Mar 1, 2007 at 03:46 PM.
