BlackSVT03

iTrader: (1)

Well... I blew my motor a few weeks ago so I was looking at getting the TSP 383. I currently have a rebuilt 4L60e transmission, but I dont think it will hold very long with a 383. I was looking at the Turbo400 but I want a 4 speed. What would be the best route to go?

Should I just get my tranny rebuilt again to be stronger? Is that possible?

darrensls1

Thats's hard to answer without knowing how much power you'll be making. But if it's 600 rwhp or less then I would look at a performabuilt lvl 3 4L60E. They run $2500 but it's gonna be one stout tranny that also comes with a one year warranty.

If it's big power like 700+ then I would definately go with a built 4L80E.

Performabuilt and FLT are the two most popular Transmission sponsors here and either can build you a tough 4L60E. Just don't take it to Joe @ AAMCO or a mom and pops tranny shop. They will not know what they are doing.

orangeapeel

iTrader: (18)

I have a manual VB 4l60 non-electric stage 3 from Suck-on. It has held up to my 347 w/ 275 shot like a champ. No transbrake or anything.

Only problem with the 4L80's is they are power eaters. If you are making retarded power, then it should be in order however.

orangeapeel

iTrader: (18)

I am moving this to the trans section.

dnkynrbk

iTrader: (34)

have a level 2 tranny will hold 700 hp and that is a built motor. call frank at performa built

WE TODD DID

iTrader: (2)

4l80s are extremely heavy too. You can always buy a good aftermarket 4l60, but if you have a good trans person in your area, you could probably save a bit of money. The 4l60s are easily upgraded to withstand a bit of power for a very reasonable price.

performabuilt

iTrader: (25)

Give us a call thanks

performabuilt

iTrader: (25)

local trans guy can build you a 4l60e that will hold up? not likley and doubt save you money either , CAll us call our competitor but dont go to the local shop
just my opinion thanks

WE TODD DID

iTrader: (2)

I've been doing it for years. I'm not the cheapest around, but by far cheaper than anyone I've seen advertised. I wouldn't suggest taking it to anyone who doesn't have experience in beefing them up though.

performabuilt

iTrader: (25)

I would agree on the dont deal with anyone inexperenced, But do give us a call we have the best warranty and price in the business,.You wont find a better trans or better customer service period......

GT Griller

iTrader: (8)

I wouldnt say that is 100% correct.

darrensls1

And I wouldn't roll those loaded dice. If 1 out of 100 really know what they are doing then I sure don't like those odds. Besides the sponsors here give us this great website for free. Lets support them when we can.

At least that's how I feel about it.