I just installed a New 9inch Moser Rear end but do I need a new drive shaft because
#1
Teching In
Thread Starter
Join Date: May 2002
Location: Texas
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I just installed a New 9inch Moser Rear end but do I need a new drive shaft because
I just installed a New 9inch Moser Rear end but do I need a new drive shaft because they had to pull some out from the transmission like and inch or so to fit. If I need a new drive shaft where can I buy a longer one. Let me know.
#2
TECH Senior Member
Re: I just installed a New 9inch Moser Rear end but do I need a new drive shaft because
How much engagement is still left in the tranny?
If it turns out that you only need a little extra length you could also get some adjustable LCAs and move the rearend a little closer to the tranny.
If it turns out that you only need a little extra length you could also get some adjustable LCAs and move the rearend a little closer to the tranny.
#3
Teching In
Thread Starter
Join Date: May 2002
Location: Texas
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Re: I just installed a New 9inch Moser Rear end but do I need a new drive shaft because
Well the machanic didn't say anything about how much ingagement is in the tranny. All he told me was that he had to pull it out like a 1inch and a half to fit it to the rear end. I called moser and they said it should be fine but I want to know from someone who has it.
#4
TECH Addict
iTrader: (2)
Re: I just installed a New 9inch Moser Rear end but do I need a new drive shaft because
If I were you Id just have one custom made locally in your area.go with a steel driveshaft or Denny's driveshaft.Im going that route when I recieve my moser 9inch. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />