6l80e in 4th Gen
Thread Starter
On The Tree
Joined: Jul 2004
Posts: 114
Likes: 0
From: Lockport,IL
6l80e in 4th Gen Anyone know if anyone is/has tried this yet. I think a 2.73 geared car would benefit quite a bit from this trans. A huge increase in the first 4 gears but still have a decent overdrive in your last 2 gears. I know this trans is in the new trucks, and its only time before someone tries it. My dad has a 06 c6 with it and i must say im pretty fond of it. I have heard it holds up damn well too. So whats up?
Ditto
These new units have control modules INSIDE the transmission
which communicate with the pcm to determine shift characteristics.
They are not going to be "swap-able" any time soon.
These new units have control modules INSIDE the transmission
which communicate with the pcm to determine shift characteristics.
They are not going to be "swap-able" any time soon.
TECH Fanatic
Joined: Mar 2004
Posts: 1,017
Likes: 0
From: Laguna Niguel, CA
What is the torque capacity of this transmission?
40Ft/LBS
J/K Doesn't the '80' mean 800Ft/LBs in first gear?
So torque*1st gear ratio should be less than 800ft/lbs in order for the tranny to last...
40Ft/LBS
J/K Doesn't the '80' mean 800Ft/LBs in first gear?
So torque*1st gear ratio should be less than 800ft/lbs in order for the tranny to last...
[flame suit on] 
