Automatic Transmission 2-Speed thru 10-Speed GM Autos | Converters | Shift Kits
Sponsored by:
Sponsored by:

manual VB not working right. advice please

Thread Tools
 
Search this Thread
 
Old 05-03-2007, 12:51 AM
  #1  
TECH Apprentice
Thread Starter
iTrader: (1)
 
pyronotic138's Avatar
 
Join Date: Apr 2006
Posts: 300
Likes: 0
Received 0 Likes on 0 Posts
Default manual VB not working right. advice please

build a 4l60e manual VB tranny and installed.

setup is LT based motor with a procharger

tranny is 4l60e with the VBP-VAC, 46-mod, manual Valvebody mod kit

i got told to install the VBPvac for my setup becuase you dont want a possitive pressure on the accumulator inside the 4l60e with manual vb. but yet when i am in my car all the way it doesnt seem to want to shift. i know that there has to be some type of vacuum on it but no as much as for idle. i am going to change the vbpvac for a different type of one way diaphram but if that doesnt work i really dont know what else to do. the only way it shift at wide open throttle is when i shift i have to let out on it. which in turn my words i think its due to a vacuum problem on the accumulator for the fact the only way that i dont have vacuum is when i am at WOT and i have possitive prssure from the supercharger. any advise and or opinions on what to check for would be highly appriciated.




All times are GMT -5. The time now is 03:58 AM.