Tranny cooler lines on Tranny ACCESS??
Tranny cooler lines on Tranny ACCESS?? Wanting to add my Griffin radiator to my car real soon and I had the rad built without the tranny cooler lines. I decided I was going to run braided lines from the tranny case to a External tranny cooler mounted onto the front of my radiator.
My question is am I going to have enough room and access to unbolt the hard lines from the tranny case. If not does anyone have any pointers??
Didn't know if I would have to move the tranny crossmember or anything????
My question is am I going to have enough room and access to unbolt the hard lines from the tranny case. If not does anyone have any pointers??
Didn't know if I would have to move the tranny crossmember or anything????
Done some thinking and since I plan on doing this to my 4L80E when I install it I figured I could just use something like this from the hardlines to braided
http://store.summitracing.com/partde...5&autoview=sku
What size is the tranny lines??
3/8?
http://store.summitracing.com/partde...5&autoview=sku
What size is the tranny lines??
3/8?
