I have not touched this tranny after it was rebuilt with said modifications. I dropped the pan and caught the fluid and it looked like you just poured it out of the bottle.

 

OK I get it!

Thanks abunch. I believe that there is a problem either in the 3/4 clutch itself or in the feed circuit for that clutch. It is also possible that the TV is stuck and it is not allowing pressure rise and that could have easily allow the 3/4 clutches to burn in just a few applications of those clutches.

But that is based on a conversation over the internet... not so easy sometimes. When you can get the pan off of it let us know if the TV is free or is binding. We''l go from there.

g

 

You got it!