VIG converter compatibility

Reply Subscribe

Thread Tools

Search this Thread

Jul 18, 2007 | 07:36 AM

Alex99

Thread Starter

Teching In

iTrader: (1)

Joined: Nov 2006

Posts: 37

Likes: 1

VIG converter compatibility

Hi,

I need a quick answer to the following question:
I am looking at a 4L60 Vigilante converter out of a 1994 Formula. I am not sure which engine is in there, I guess a LT1.
Will this converter fit into my 2000 A4 Corvette?

Thanks
Alex

Jul 18, 2007 | 07:53 AM

big wally 55

On The Tree

Joined: Jun 2007

Posts: 165

Likes: 0

From: haltom city/DFW, Texas

It will not fit ! The input shaft and stator support spacing is different on the transmission side and the pilot is different on the engine side !!

Jul 18, 2007 | 09:57 AM

big wally 55

On The Tree

Joined: Jun 2007

Posts: 165

Likes: 0

From: haltom city/DFW, Texas

I have to say that you can teach an old dog new tricks !! I found out since I answered your converter question that the Corvette converter was different than the F body in the later years , and the unit in question should work just fine in your application .

Thanks for the heads up VINCE ,
John

Jul 18, 2007 | 12:49 PM

Alex99

Thread Starter

Teching In

iTrader: (1)

Joined: Nov 2006

Posts: 37

Likes: 1

So just to make it clear, you say it will fit? The owner told me the engine is indeed a LT-1. You're sure the engine side of the converter is the same?!
Here is a pic of it.

Thanks Alex

Attached Thumbnails