TH350 Trouble
Thread Starter
Registered User
Joined: Jul 2007
Posts: 9
Likes: 0
TH350 Trouble Hey guys I've been having this problem, that came out of nowhere. Just started today. I have a Turbo 350 tranny and a 3inch aluminum driveshaft. There has been no problems, the tranny seemed as strong as a bull, and now in order to get her to move at all I have to be at full throttle in reverse or drive to get her to move about 3mph. I have a 2200 stall on it. The shifter is a B&M ratchet slapshifter (Megashifter)
Any help would be appreciated
thanks
-steve
Any help would be appreciated
thanks
-steve
Remove a cooler line and check for pump flow by starting the engine will make a mess.Remove pan and see whats in there coud be many things bad converter/pump/clogged fiter.
__________________
No remove a line, then start the engine momentarily it should spray fuid out if not the pumps bad
\
\
Originally Posted by 89maro
Start the motor, and remove the lines?
__________________
Thread Starter
Registered User
Joined: Jul 2007
Posts: 9
Likes: 0
Hey guys I appreciate the help. I went under there is adjusted the shift cable. Yeah I know I guess you can adjust it. She probally wasn't fully in gear. She now works better than ever.
P.S. She sprayed fluid.
Thanks again
-steve
P.S. She sprayed fluid.
Thanks again
-steve
