i got a question about trany mount
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: humble
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
i got a question about trany mount
ok guys my 2000 ws6 formula trany mount was bad. so since i am getting a yank ss3600 stall put in i thought that a stronger mount will be needed. so i got a poly mount. i have not yet installed the stall. becasue when i put the new mount the car make very wierd vibrations. drive and run great shifts perfect. is this normal. please let me know. thanks a lot. vasi
#3
Teching In
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: humble
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
thanks i kind of thought that my last t/a with the big cam and the stall i guess i never thought about it. thanks i just wanted someones imput do to i never did this to the old t/a i had everything put in.
#4
TECH Fanatic
iTrader: (3)
I changed out my original rubber mount and installed a poly mount. Needless to say, it did not stay in there for more than 500 miles. The vibration and noise was excessive and could not live with it. I went back to the rubber mount and much better. I have ploy just about everywhere and the transmission mount was the most noticeable.
#5
Teching In
Thread Starter
iTrader: (2)
Join Date: Mar 2005
Location: humble
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Blacker
I changed out my original rubber mount and installed a poly mount. Needless to say, it did not stay in there for more than 500 miles. The vibration and noise was excessive and could not live with it. I went back to the rubber mount and much better. I have ploy just about everywhere and the transmission mount was the most noticeable.
#6
TECH Enthusiast
Join Date: May 2004
Location: St. Louis, MO
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
I have had an energy suspension mount in my car for like 2 years. Didn't pay attention then, but have a god awful vibration. It is there just revving the motor up in park and terrible at certain rpms in 2nd and 3rd gear. I bought a prothane one, and hope this fixes it. Just gotta get the lift clear to install it.