Parts to handle more power?
Parts to handle more power? I had the trans rebuilt about 6k miles ago, maybe a little more. I only had the cash to do a stock rebuild plus a shiftkit and tranny cooler 
. My question is are there any parts that you can upgrade to allow the trans to handle more power without actually rebuild the entire thing??
The reason i ask is that i have bolt-ons, cam, and im plannin on installin a high stall converter (which i've heard puts more strain on the tranny... or at least produces more heat) and eventually goin heads and/or small shot of spray. Down the road i will get a full on performance rebuild, but for now im just trying to find out if i can add a little more security.
. My question is are there any parts that you can upgrade to allow the trans to handle more power without actually rebuild the entire thing?? The reason i ask is that i have bolt-ons, cam, and im plannin on installin a high stall converter (which i've heard puts more strain on the tranny... or at least produces more heat) and eventually goin heads and/or small shot of spray. Down the road i will get a full on performance rebuild, but for now im just trying to find out if i can add a little more security.
Shift kit, cooler, Perhaps the sonnax 2nd servo I wouldnt bother with the outter 4th servo unless you plan to go WOT 4th. Dont get to carried away with the shift kit keep the settup mild with stock parts,
__________________
Well i already have a b&m shift kit (maybe stage 1 or 2 not sure)shifts just fine, not too soft not too hard. But what is the sonnax 2nd servo? What does it do and what will it help prevent? Also why only do the 2nd servo?
Also, im planning on putting on a tranny temp sensor to make sure i keep the temps down. Is there anything else i can do with the pan off?? Oh and will spinnin her up to 6200 be a problem with the stock trans??
