stall ?
Thread Starter
Staging Lane
Joined: Dec 2007
Posts: 85
Likes: 0
stall ? I have a 2002 camaro ss with full exhaust CAI and ported TB. I'm going to put a stall in and was wondering if the TCI Super Street Converter 3000 stall was a god stall. I'm going to put a 230 234 ish cam in next. Thanks
I'm guessing you are picking that stall because it is inexpensive. Also, that 3000 stall is too small imo. I would step up and get a Yank 3600 stall or a Vig 3200 (underrated) if its your daily driver.
If its more of a weekend car I would look into a Yank ss4000 or a Yank PT4000+.
Don't forget you will need a transmission cooler as well.
My Yank ss3600 shifts at 2200 rpm during normal driving, perfect for a daily driver. I see no need to use a 3000 stall unless you are using a power adder.
If its more of a weekend car I would look into a Yank ss4000 or a Yank PT4000+.
Don't forget you will need a transmission cooler as well.
My Yank ss3600 shifts at 2200 rpm during normal driving, perfect for a daily driver. I see no need to use a 3000 stall unless you are using a power adder.
If you are looking for a Vig, Speed Inc. sells the Vig 3200 for $725 w/free shipping.
For the tranny cooler I went with a Hayden 30k unit from Advanced Auto Parts for $50.
I would do some research before you actually buy one though.
For the tranny cooler I went with a Hayden 30k unit from Advanced Auto Parts for $50.
I would do some research before you actually buy one though.
Thread Starter
Staging Lane
Joined: Dec 2007
Posts: 85
Likes: 0
Is the tranny cooler a bitch to put in And I noticed the TCI 3500 is a little bit cheaper. Is this a good stall? And by the way which vig is underrated theres a 28-30 32-34?
Last edited by kratos2250; Mar 12, 2008 at 01:41 AM.
