6L80 into a 2wd??
07-28-2008, 06:39 PM
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
6L80 into a 2wd?? Just had a complete 2008 L92 & 6L80 fall on my lap and plan to install into my 1980 camaro.
Has anyone changed this trans over to two wheel drive configuration? Will I just need a tailshaft housing or is the shaft different also?
On another topic, where can I find a pcm other than getting raped through the dealer?
Thanks, Joe
Has anyone changed this trans over to two wheel drive configuration? Will I just need a tailshaft housing or is the shaft different also?
On another topic, where can I find a pcm other than getting raped through the dealer?
Thanks, Joe
07-28-2008, 07:58 PM
#3
On The Tree
Thread Starter
iTrader: (1)
Join Date: May 2002
Location: Jersey
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the info on the shaft length, that was what I was afraid of.
I plan to install it with the L92 so I will use the OEM wiring and PCM & TCM.
Thanks again, Joe
I plan to install it with the L92 so I will use the OEM wiring and PCM & TCM.
Thanks again, Joe
07-28-2008, 09:40 PM
#5
11 Second Club
Join Date: Feb 2008
Location: TN
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
There was a post either in this section are hybrid fourm about a guy trying to install a 6L80 in a Jeep. Don't know if his is a 2whl or 4whl one. Might be 2whl. Might do a search as he may need a 4whl one and a swap might be cheaper option for you both.
