408lq4

iTrader: (1)

i have switched to the 6010 msd box and was looking some help on a map curve on a 6.0 block tuned into a 408 na 14 to 1 compression. if u dont mind sharing your curves with me send them to me at keithbrickhouse@hotmail.com or any advice would be great and i am also running e85

S10xGN

iTrader: (11)

You need to decide if that's what you really want to do and where your vacuum runs at idle & cruise. Here's one for my 10.5:1 gas engine, don't know how it would begin to apply to a 14:1 E85 engine...

ZONES89RS

iTrader: (25)

20* initial, ramped to 36 all in my 2000, then from 4K to 5 it dips to 35, then back to 36 by 6K.

speedtigger

iTrader: (16)

I was running without the map advance until today. I added 12 degrees coming in at 10 PSIa and all in by 9 PSIa. It is a very welcome change. The car is much lighter on it's feet cruising around town. It takes less throttle to get it moving and to cruise. It cleaned up the exhaust so it does not smell so rich and I bet it is keeping the plugs cleaner too.