Carb Size
#1
Staging Lane
Thread Starter
Join Date: Jan 2012
Location: Nashville Tn.
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Carb Size
Anyone running a 376 with an 850?
I'll be running a Demon 850 from one of my old BB 502 street engines. Engine is LS3 376 with ASA Cam 113 L/S angle and dual plane LSX intake. Think the carb may be a little big or need a carb spacer?
Looking for 500+ lb.ft. of Torque. I may put this build on the pump. Seriously thinking about sending the new LS3 heads out for a killer cnc valve job @ PRC.
I'll be running a Demon 850 from one of my old BB 502 street engines. Engine is LS3 376 with ASA Cam 113 L/S angle and dual plane LSX intake. Think the carb may be a little big or need a carb spacer?
Looking for 500+ lb.ft. of Torque. I may put this build on the pump. Seriously thinking about sending the new LS3 heads out for a killer cnc valve job @ PRC.
#2
10 Second Club
364" with a 750 Mighty Demon....working great.
3Pedals was running a 850 on his 364" and a lot more cam than me.
I'd at least try it...One guy (I forget who) kept going bigger on the carb and kept getting faster....think he even ran a 1050 Dominator at one point.
3Pedals was running a 850 on his 364" and a lot more cam than me.
I'd at least try it...One guy (I forget who) kept going bigger on the carb and kept getting faster....think he even ran a 1050 Dominator at one point.
#3
9 Second Club
iTrader: (9)
Join Date: Apr 2011
Location: Indian Rocks Beach Fl
Posts: 1,059
Likes: 0
Received 0 Likes
on
0 Posts
These motors can take a bigger carb then your typical SBC due to as we all know the cylinder heads on LS motors can move some air. I would think the 850 would work great with some tuning.