Leaving power on the table?
#2
TECH Senior Member
Are they ported? If not there is some to be gained with a good port job. But with a motor that size you might be better off with some good aftermarket heads like Trick Flow or Airflow Research. Their heads BREATHE. Which cam do you have? Intake manifold?
#3
10 Second Club
243 heads are what ? 260-270 cfm
LS3 heads are 315 cfm
40-50cfm = 80+ HP "capable"
Roughly 2 - 2.2 HP per cfm
LS3 heads are 315 cfm
40-50cfm = 80+ HP "capable"
Roughly 2 - 2.2 HP per cfm
Last edited by Doug G; 08-17-2018 at 04:43 PM.
#4
Staging Lane
Thread Starter
Torque peak
The question gets down to peak torque and where it occurs. I need the peak torque to be pretty high in the rpm range and as high a number as possible. More important to me than peak hp since I'm not likely to spin enough rpm to hit peak hp.