Headers
Thread Starter
Teching In
Joined: Apr 2003
Posts: 36
Likes: 0
From: Auistin, TX
Headers I need some help. I am using an LS motor in a 63 Corvette and I am having problems with headers. I am looking for someone that has headers on an LS motor Camero that is willing to give me some measurments. I would like to use off the shelf headers if possible.
The measurements I need are:
1. The postion of the most forward tube of the headers relative to any point that is easy for you to measure on the engine
2. The width of the header from the block at any point that is easy to measure
3. The width at the collectors from the inside of one collector to the other.
Any assistance with any or all of these measurements would be appreciated.
David Nelson
The measurements I need are:
1. The postion of the most forward tube of the headers relative to any point that is easy for you to measure on the engine
2. The width of the header from the block at any point that is easy to measure
3. The width at the collectors from the inside of one collector to the other.
Any assistance with any or all of these measurements would be appreciated.
David Nelson
