Anybody know of a short 3/8in fuel line connector w/male to male ends?
#22
#24
I used a compression fitting from the hardware store to 3/8 hard line to the front , then a compression to -6 an fitting , with a short braided an line to the fuel rail . Do not use russels compression fitting that has a rubber sleeve , they are only ratted to 3 bar , ls fuel systems run 4 bar
#25
Teching In
iTrader: (2)
Just looking at this thread as I am in process of running my fuel lines with the corvette style filter, regulator. My question is do most of you guys run an additional filter and if so do you install it before or after. I didn't think of running a extra filter but any input would be appreciated . Thanks
#26
TECH Veteran
iTrader: (4)
Just looking at this thread as I am in process of running my fuel lines with the corvette style filter, regulator. My question is do most of you guys run an additional filter and if so do you install it before or after. I didn't think of running a extra filter but any input would be appreciated . Thanks
#27
Launching!
iTrader: (1)