Foxbody/LS guys - procharger fit?
#1
Foxbody/LS guys - procharger fit?
I've got a P1 leftover from my c5 and was thinking about doing a ls6 swap into a notchback with the aje kmember. The few pics I've seen lead me to believe that this will fit fairly easily. Does anyone know for certain or not if this would fit easily using the old procharger bracket?
#2
TECH Senior Member
iTrader: (127)
Im currently working on a bracket to mount a p600b on my car. Its a reverse rotation unit. My car has manual steering.so not using ps. Im using truck crank pulley,car wp, truck alt and fast intake. Running everything off 6rib with supporting pulley for brlt wrap by blower pulley
. Also using mechanical tensioner. Had lot of interest in my setup. Lookin to find a used d1 or p1 to make similar setup. just gonna make new bracket since i figured i can make the offset even more inboard to the motor. I used the p600b cuz thats what i got on hand. It workes very well.but not likin how high the blower sits with this bracket. Also new version allow for shorter belt. Im thinkin bout 2in shorter
. Also using mechanical tensioner. Had lot of interest in my setup. Lookin to find a used d1 or p1 to make similar setup. just gonna make new bracket since i figured i can make the offset even more inboard to the motor. I used the p600b cuz thats what i got on hand. It workes very well.but not likin how high the blower sits with this bracket. Also new version allow for shorter belt. Im thinkin bout 2in shorter