Vintage Air low pass. side comp. bracket
08-11-2012, 02:15 PM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: May 2011
Location: Ponchatoula, La.
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Vintage Air low pass. side comp. bracket Guys, looking for a little info before I waste my money. Has anyone successfully used the V.A. comp. bracket that mounts the compressor low on the pass. side and runs off of the rear 4 groove pulley (for the factory a/c) with S&P adapter plates on a first gen f-body?
I know I have to notch the frame, and I have no problem with that, I just want to be sure that the depth will work and the compressor will not hit the motor mounts. If so, what compressor is used and any pics will be helpful.
Again, Thanks in advance!!!!!!
EDIT: Has anyone used the alan grove components bracket with success?
I know I have to notch the frame, and I have no problem with that, I just want to be sure that the depth will work and the compressor will not hit the motor mounts. If so, what compressor is used and any pics will be helpful.
Again, Thanks in advance!!!!!!
EDIT: Has anyone used the alan grove components bracket with success?
Last edited by jlay; 08-11-2012 at 05:54 PM.
