ls3conversion,engine harness works, not getting power to some lights
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Jan 2009
Location: Newport NC
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
ls3conversion,engine harness works, not getting power to some lights
hi there
i am just finishing up my 94 trans am ls3 engine swap. Engine runs, all gauges work, obd2 port works, all that looks good. Now for the bad. I do not have tail lights, running lights, dash lights and my headlights do have power but headlight motor module is not getting power, so the headlights won't pop up. I do have headlights, turn signals and brake lights. I have checked and there is no power to the fuses on the drivers side dash fuse box. I do have constant power (red) going to the headlight switch, but the orange wire (switched power does not have any voltage going to it. Any ideas. Let me know
tia
andy schuck
i am just finishing up my 94 trans am ls3 engine swap. Engine runs, all gauges work, obd2 port works, all that looks good. Now for the bad. I do not have tail lights, running lights, dash lights and my headlights do have power but headlight motor module is not getting power, so the headlights won't pop up. I do have headlights, turn signals and brake lights. I have checked and there is no power to the fuses on the drivers side dash fuse box. I do have constant power (red) going to the headlight switch, but the orange wire (switched power does not have any voltage going to it. Any ideas. Let me know
tia
andy schuck
Last edited by andysc; 10-09-2014 at 08:10 AM. Reason: clarification