5.3 swap fan wiring problem
#1
Staging Lane
Thread Starter
iTrader: (9)
Join Date: Jul 2014
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
5.3 swap fan wiring problem
Here's what I got..... 01 2wd truck harness and pcm, 04 5.3 and 4l60e. It's swapped into a 1990 c1500 regular cab short bed 2wd. I got everything figured out by either info I found on here, lt1swap.com, or just trial and error. The truck runs and drives great I just can't figure out what is going on with my electric fans I've got fan 1 wired to pcm blue pin 42 for relay ground and fan 2 to red pin 33. The hot trigger wire for my fans is key on power only. When the engine is cold I turn the key on all is good, no fans running. As soon as I start the truck fan 1 comes on (blue pin 42). Fan 2 works perfect. I have wired up plenty of stuff using relays before, I've double and triple checked all my wiring. Btw, my fans are wired very simple.... one relay per fan. They're either on or off when the relay sees key on power and a ground. Why is blue pin 42 grounding as soon as I start the engine? Also, at the moment a/c isn't tied into this. The fans should only come on at a given ECT. I've consulted with my tuner (blackbear tuning) and I'm pretty sure he feels like it's not in the tune, but I don't know what else it could be.
#2
The Red/Blue Trucks don't use primary fan from the factory. When you inserted a wire in there you probably realized there wasn't a wire to begin with. You need to check the tables in the tune. I'm not sure what happens with a stock tune if you put a wire in the spot without adjusting. So check the tables if you can
#3
Staging Lane
Thread Starter
iTrader: (9)
Join Date: Jul 2014
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
The Red/Blue Trucks don't use primary fan from the factory. When you inserted a wire in there you probably realized there wasn't a wire to begin with. You need to check the tables in the tune. I'm not sure what happens with a stock tune if you put a wire in the spot without adjusting. So check the tables if you can
#6
TECH Resident
iTrader: (57)
The 01 truck pin out shows that pin 42 doesn't have a wire on it, but 41 is a ground. Makes sense that when you turn your key on the fan runs, as it could be pinned to the ground.
As for pin 33, that is the pin to the recirculation door. Your tuner needs to look in the tune file and toggle recirc. door to fans, then it should work for the second fan.
Post #13 on the link below has the pinouts for a 2001 truck...
https://ls1tech.com/forums/conversio...swap-faqs.html
More on the subject....
https://ls1tech.com/forums/conversio...lp-please.html
And one more with more detail...
https://ls1tech.com/forums/conversio...ctic-fans.html
T,
As for pin 33, that is the pin to the recirculation door. Your tuner needs to look in the tune file and toggle recirc. door to fans, then it should work for the second fan.
Post #13 on the link below has the pinouts for a 2001 truck...
https://ls1tech.com/forums/conversio...swap-faqs.html
More on the subject....
https://ls1tech.com/forums/conversio...lp-please.html
And one more with more detail...
https://ls1tech.com/forums/conversio...ctic-fans.html
T,
Last edited by TomM; 10-22-2015 at 03:40 PM.
#7
Staging Lane
Thread Starter
iTrader: (9)
Join Date: Jul 2014
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
The 01 truck pin out shows that pin 42 doesn't have a wire on it, but 41 is a ground. Makes sense that when you turn your key on the fan runs, as it could be pinned to the ground