ECM info, please
#1
Teching In
Thread Starter
Join Date: Jun 2015
Location: Normal, Il.
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
ECM info, please
I've been doing a 5.3 swap into a 94 S10.
I'm ready to get an ECM set up to use.
I have an option of getting a 411 ECM, instead of the 896 I already have. Opinions?
Either way, I have to have vats and rear O2 sensors (emissions) deleted . Also need to set electric fans to come on. Do I need to have auto trans functions turned off?
Is there anything else I need to have done to have a running driving vehicle?
Does the ECM need to know what gear ratio? Haven't got a rear end yet.
Besides running the engine, what else does the ECM control?
I'm especially concerned about the speedo working.
Is there anything else I need to have done?
Thanks
Truck is 94. Engine is 2000 5.3L, trans '96 NV3500 5 speed
I'm ready to get an ECM set up to use.
I have an option of getting a 411 ECM, instead of the 896 I already have. Opinions?
Either way, I have to have vats and rear O2 sensors (emissions) deleted . Also need to set electric fans to come on. Do I need to have auto trans functions turned off?
Is there anything else I need to have done to have a running driving vehicle?
Does the ECM need to know what gear ratio? Haven't got a rear end yet.
Besides running the engine, what else does the ECM control?
I'm especially concerned about the speedo working.
Is there anything else I need to have done?
Thanks
Truck is 94. Engine is 2000 5.3L, trans '96 NV3500 5 speed