'67 Impala. Factory right-hand drive. 6.0L swap.
#41
Another member here (Michael Yaunt) mentioned that his DW340 was whisper quiet, so I took the chance.
As I recall, and you can maybe see it in the video, but the Walbro 255 and the DW200 are nearly identical externally. I did not change anything with respect to pump depth.
Andrew
As I recall, and you can maybe see it in the video, but the Walbro 255 and the DW200 are nearly identical externally. I did not change anything with respect to pump depth.
Andrew
#42
Hey folks. It's been a while, but I thought I would update on the noisy Walbro pump situation.
Tha TanksInc module is fine, but the supplied Walbro 255 pump is obnoxiously loud. I took Andrew's advice above and decided to swap it out with a Deatschwerks DW200.
Whilst I somehow manged to fail in taking photos of the parts and install (essentially a direct swap), I did manage to get a before-and-after video for noise comparison. It is short, but sweet - and rather conclusive.
Tha TanksInc module is fine, but the supplied Walbro 255 pump is obnoxiously loud. I took Andrew's advice above and decided to swap it out with a Deatschwerks DW200.
Whilst I somehow manged to fail in taking photos of the parts and install (essentially a direct swap), I did manage to get a before-and-after video for noise comparison. It is short, but sweet - and rather conclusive.
The following users liked this post:
rsz288 (02-18-2023)
#43
TECH Senior Member
iTrader: (7)
Russ,
I am glad it worked out for you. The difference was as dramatic for you as it was for me!
My video covers the installation of the DW200 in place of the Walbro pretty well. YouTube just came out with some new rules, and I would love to add more subscribers in the new future.
If any of you found my video helpful, please subscribe and share.
https://www.youtube.com/user/projectgattago
Russ, I subscribed to yours!
Thanks!
I am glad it worked out for you. The difference was as dramatic for you as it was for me!
My video covers the installation of the DW200 in place of the Walbro pretty well. YouTube just came out with some new rules, and I would love to add more subscribers in the new future.
If any of you found my video helpful, please subscribe and share.
https://www.youtube.com/user/projectgattago
Russ, I subscribed to yours!
Thanks!
The following users liked this post:
rsz288 (02-18-2023)
#44
Russ,
I am glad it worked out for you. The difference was as dramatic for you as it was for me!
My video covers the installation of the DW200 in place of the Walbro pretty well. YouTube just came out with some new rules, and I would love to add more subscribers in the new future.
If any of you found my video helpful, please subscribe and share.
https://www.youtube.com/user/projectgattago
Russ, I subscribed to yours!
Thanks!
I am glad it worked out for you. The difference was as dramatic for you as it was for me!
My video covers the installation of the DW200 in place of the Walbro pretty well. YouTube just came out with some new rules, and I would love to add more subscribers in the new future.
If any of you found my video helpful, please subscribe and share.
https://www.youtube.com/user/projectgattago
Russ, I subscribed to yours!
Thanks!
#47
TECH Senior Member
Have you tried Googling them? Why do you post in an old thread asking this?
#49
They are made by fellow forum member @kwhizz He posted earlier in this thread.
That is why he posted in an old thread so could get an answer from the source!
Why do you feel it is your duty to troll and be a thread time line police. Every forum has one I guess you are “that guy”
Do you ever post anything helpful other than to *** kiss to Holley products and to remind every new member they may have posted in a dormant thread?
Last edited by lizeec; 05-14-2020 at 10:08 AM.
#50
TECH Senior Member
G Atsma
That is why he posted in an old thread so could get an answer from the source!
Why do you feel it is your duty to troll and be a thread time line police. Every forum has one I guess you are “that guy”
Do you ever post anything helpful other than to *** kiss to Holley products and to remind every new member they may have posted in a dormant thread?
That is why he posted in an old thread so could get an answer from the source!
Why do you feel it is your duty to troll and be a thread time line police. Every forum has one I guess you are “that guy”
Do you ever post anything helpful other than to *** kiss to Holley products and to remind every new member they may have posted in a dormant thread?
You notice that had he looked within this thread, the answer was right in front of him? That's why I asked if he Googled it.
I don't kiss Holley's ***. They happen to have the most comprehensive and best fitting swap products line, and the best aftermarket EFI. Many here will attest to this. If you read most of my posts (and I know you don't...) you would know I try to help where I can. The stuff you **** and moan about me is a small fraction of what I post about.
Now go crawl back to your safe place, hang onto your blanky, and suck your thumb, or whatever.
#51
I will agree with you on the Holley stuff being well engineered and quality items, I can show you where I have purchased and used several of their swap kits, lets see one of your swaps? I try not to be negative but you are obviously been in that California lockdown too long. Your posts are basically cheerleading, and you obviously are one of those that try to get their post count up as high as you can, now run along and go post on the Content Curators threads which also seem to bother you.
Im done, have a nice day.
Im done, have a nice day.
Last edited by lizeec; 05-14-2020 at 11:53 AM.
#53
TECH Senior Member
kwhizz is still around. PM him.
The following users liked this post:
G Atsma (02-18-2023)
#55
TECH Senior Member
The following users liked this post:
tsteves88 (02-18-2023)