1971 Chevelle LS/t56
#1
1971 Chevelle LS/t56
Here is my attempt to start a build thread on my ongoing project. It is a 71 Chevelle that I planned on swapping a ls2/t56 from a 2006 gto and into it. This is my 1st time building a car and I've learned a lot during this process.
Here is what I started with.
#2
ModSquad
iTrader: (6)
It’s about time you started a build thread! Looking forward to this!
#5
I'm going to skip all the metal work, it took me a year to replace all the rust on the car. After I was satisfied with the floor, I removed the body from the frame and coated the body in spi epoxy.
I sprayed upol raptor liner on the underbody and I coated the entire interior with lizard skin.
I sprayed upol raptor liner on the underbody and I coated the entire interior with lizard skin.
Trending Topics
The following users liked this post:
2000LS1M6 (10-12-2020)
#15
I installed the engine and transmission back in the car and I started to work on the exhaust. I'm running speed engineering headers which fit great and a used pypes 3 inch exhaust that I found on Craigslist. Because of the HPI kit I had to modify the exhaust a good bit.
#20
After the body was mounted to the frame I installed all the front body panels on for mock up so that I can wire the car. I went with the AAW classic update kit for the car. I also installed a Denny's driveshaft, aeromotive stealth tank, Holley Frostbite radiator and Ford
Windstar fans.
Windstar fans.