obd2 connecter difficulty... :(

Reply Subscribe

Thread Tools

Search this Thread

Nov 19, 2008 | 05:03 PM

wajouba

Thread Starter

TECH Regular

iTrader: (1)

Joined: Oct 2007

Posts: 415

Likes: 0

obd2 connecter difficulty... :(

Ok, I have a 240sx with an LS1 swap, and my car is very unstable... I really need to know what codes its firing up at me, but my OBD2 Connecter is not connected... my question is, where is the purple data line located?. do we take it from the original LS1 car dash harness? or is it in the ECU harness?

im kinda lost

Thanks

Nov 19, 2008 | 06:06 PM

ramair21

12 Second Club

iTrader: (2)

Joined: Dec 2005

Posts: 339

Likes: 0

From: Cali

Here is the pin out for the OBD2 connector. Just look at your harness to find the serial data wire and connect and hook up the rest

Good luck

Attached Thumbnails

obd2 connecter difficulty... :(-obd-ii_pinout.jpg

Nov 20, 2008 | 09:11 PM

wajouba

Thread Starter

TECH Regular

iTrader: (1)

Joined: Oct 2007

Posts: 415

Likes: 0

I have the pin out for it and everything, I just didn't know where the wires are supoused to be comming to the connecter from...

Nov 20, 2008 | 10:35 PM

busta9876

TECH Enthusiast

iTrader: (3)

Joined: Nov 2004

Posts: 558

Likes: 6

From: West Plains, Missouri

C1 - Blue, Pin 58 - Class 2 Serial Data. Its a dark green wire in the engine harness.

OBD2 port Pin 2 - Class 2 Serial Data
Pin 4,5 Ground
Pin 16 12v+

good luck