? on cam selection
Thread Starter
Registered User
Joined: Feb 2009
Posts: 28
Likes: 0
? on cam selection He guy's new to the site and a lot of nice cars on here.I just picked of a 95 mustang that I'm going to be putting a 6.0 in.It's a LQ9 out of a 03.I was going to run fi but just decided to go carb with it.The car will be set up with aje k-member kit ,410 gears,350 turbo trans with a 4500 stall,mt drag radials,4 in cowl hood,vic jr intake and msd box.my ? is what cam would you recommend,not sure on the cars weight but i'm sure it's pretty heavy(it does have manual windows though thats a plus lol)would like to get this car in the high 11's. the car will be driven on the street a little but will see a lot of track time.so if you would please help point me in the right direction with cam and springs and anything else that would help thanks
You might get good answers to your cam question over on the Gen III Internal Engines forum since it is not conversion specific. They have a Cam sticky at the top of the forum. Just a suggestion.
https://ls1tech.com/forums/generatio...rnal-engine-5/
Pat
https://ls1tech.com/forums/generatio...rnal-engine-5/
Pat
Thread Starter
Registered User
Joined: Feb 2009
Posts: 28
Likes: 0
You might get good answers to your cam question over on the Gen III Internal Engines forum since it is not conversion specific. They have a Cam sticky at the top of the forum. Just a suggestion.
https://ls1tech.com/forums/generatio...rnal-engine-5/
Pat
https://ls1tech.com/forums/generatio...rnal-engine-5/
Pat
