Header Advice for LSX in 69 Camaro
Thread Starter
Teching In
Joined: Jul 2007
Posts: 15
Likes: 0
Header Advice for LSX in 69 Camaro I'm currently building my 3rd LS conversion in a 69 Camaro with TCI subframes. I have only used S&P headers in the past but no longer want to pay the $600 plus price for headers. Can anyone tell me if '98-02 camaro aftermarket long tube headers will fit? I've seen several Stainless Steel camaro headers that cost around $200. Can always take the EGR tubes off. Any suggestions? Thanks!
I'm also interested in this. Right now I've got the stock f-body manifolds in my 69 and they fit fine, so would the f-body headers fit too.... I don't know. All depends on the mounts as well, I have the hooker mounts. I'm half tempted to buy a set of the stainless headers and try them out, but I don't want to throw money away either.
Thread Starter
Teching In
Joined: Jul 2007
Posts: 15
Likes: 0
Corvette Headers FYI, The Stock early corvette Stainless Steel headers also fit in the TCI subframe. The problem with these is that the power is still down until u go to the long tube headers.
I think the only way to find out weather the camaro headers fit or not is for you to buy a set and let me know
Besides, If they don't fit I'm sure Obama will get your money back for you!
I think the only way to find out weather the camaro headers fit or not is for you to buy a set and let me know
Besides, If they don't fit I'm sure Obama will get your money back for you!
Last edited by Bubbapoppie; Mar 24, 2009 at 10:42 PM.
