Please Dont Kill Me
Thread Starter
Teching In
Joined: Nov 2003
Posts: 4
Likes: 0
From: PimpTown
Please Dont Kill Me Ok I know i will prolly be killed for posting this but this is one of those cool could it be down swaps! ok does any one know if i could put a LT1 in a 91 Mustang LX??? Thanks for all your help.
I have seen a lot of Stangs with carbed SBC's so I don't know why it wouldn't work. Now, I will prolly be killed for saying this, but, WHY? The LS1 is a far better motor-just go LS1 if you are going to all the trouble of doing a swap. (This is coming from someone about to pull a LT1 out of a truck to put in a 5.3)
On The Tree
Joined: Jul 2003
Posts: 182
Likes: 0
Im in the middle of a ls1 swap on a 86 Mustang GT 5.0
I have a tubular K-member with chevy motor mounts that bolts right in...... then we just bolt the ls1 right in and spent 30 minutes making a tranny crossmember plate to bolt the tranny to....
custom length driveline...
The car is about 2500 lbs now with driver with the huge ls1 weight savings... with the bone stock motor /w th350 on it, makes about 300 rwhp. Good for low 11's on motor, we are hoping to go 9's on a 200 shot on a bone stock motor that gets 30 mpg...
I have a tubular K-member with chevy motor mounts that bolts right in...... then we just bolt the ls1 right in and spent 30 minutes making a tranny crossmember plate to bolt the tranny to....
custom length driveline...
The car is about 2500 lbs now with driver with the huge ls1 weight savings... with the bone stock motor /w th350 on it, makes about 300 rwhp. Good for low 11's on motor, we are hoping to go 9's on a 200 shot on a bone stock motor that gets 30 mpg...
