Fox Swap Guys Come In

Reply Subscribe

Thread Tools

Search this Thread

Aug 26, 2009 | 03:04 PM

MasterMindMotorsport

Thread Starter

Staging Lane

Joined: Nov 2007

Posts: 84

Likes: 0

From: S. Michigan

Fox Swap Guys Come In

anyone tried using the hooker block huggers yet ? Im doing an LQ9 on my personal car and just remembered about these from use on a 34 ford LS2 swap I did. Only thing I would think to not work out is the steering ?

any input appreciated

Aug 27, 2009 | 11:25 AM

bjamick

TECH Veteran

iTrader: (31)

Joined: May 2006

Posts: 4,218

Likes: 3

From: Birmingham AL.

I'm not for sure, they should work. I wish you could get measurements off of a site so you can make a decision and not waste your money.

Aug 27, 2009 | 12:20 PM

jfg455

TECH Enthusiast

iTrader: (5)

Joined: Aug 2008

Posts: 656

Likes: 0

From: nh

No they wont work on the drivers side due to steering clearance. Look down in this build and you will see a good shot of the drivers side block header and how it covers the motor mount. In the 99 stang I did the steering arm goes right under the drivers side motor mount.

https://ls1tech.com/forums/conversio...old-volvo.html

Reply Subscribe