5.3/4l60e "for the future" build
Thread Starter
On The Tree
Joined: Feb 2009
Posts: 130
Likes: 0
From: san antonio tx
5.3/4l60e "for the future" build ok.. so a small intro... I have a 84 silverado that came with the 305/700r4 set up, I had dream with a truck just like this since I was a kid, so just a little over a year ago I bougth one... and it didnt take long to start dreaming again... the truck was painted 2 months after I bought her... and now its time to do the most needed and anticipated hearth transplant to take this old truck into the Future years.this I hope shouldnt take me more than 8 weeks to finish.. I know its a long time, but I am a over the road driver and can only work at it about 10 hrs a week.... I first want to thank everyone that has done it before for taking the steps and making it easier for us to follow....ok enough enough 
I bought a low mile 5.3 and even lower miles 4l60e so here she is 
I bought a low mile 5.3 and even lower miles 4l60e so here she is Last edited by fptransport; Feb 3, 2010 at 02:40 AM. Reason: changde thread name
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
On The Tree
Joined: Feb 2009
Posts: 130
Likes: 0
From: san antonio tx
sorry to disappoint you guys on the " I thought this was a Delorean" issue 
I will see about a changing it some
thanks,, thats pertty much the way it was, actually the paint wasnt that bad, but there was a guy that owed me some money and he made me a offer to paint it at his paint and body shop in exchange for the $800 he owed me, I thought he was kidding, but he did it and not jus that but he took the paint to bare metal , and spray some expensive proxy black primer, then paint,, he did a real good job and I felt I should pay him some for the difference but he didnt accept any $$$$$....
I will post more pics when I get home sometime friday..........
I will see about a changing it somethanks,, thats pertty much the way it was, actually the paint wasnt that bad, but there was a guy that owed me some money and he made me a offer to paint it at his paint and body shop in exchange for the $800 he owed me, I thought he was kidding, but he did it and not jus that but he took the paint to bare metal , and spray some expensive proxy black primer, then paint,, he did a real good job and I felt I should pay him some for the difference but he didnt accept any $$$$$....
I will post more pics when I get home sometime friday..........
Thread Starter
On The Tree
Joined: Feb 2009
Posts: 130
Likes: 0
From: san antonio tx
thats a nice looking truck dec010974 .. good to hear you are almost done,,,
actually as of right now.. all I have done is installed the engine into the truck, re worked the harness, I am waiting to get my pcm back, and right now I am researching the fuel system stuff,, I am going to run a inline pump with the vette filter, but LOST
in the FUEL LINE FITTING WORLD there is too many is little confusing.. I have a question thread in the fuel system forum,, just no one has answered yet... i did order some 6an braided line and some fittings but dont know if they are going to work or not till I get them
actually as of right now.. all I have done is installed the engine into the truck, re worked the harness, I am waiting to get my pcm back, and right now I am researching the fuel system stuff,, I am going to run a inline pump with the vette filter, but LOST
in the FUEL LINE FITTING WORLD there is too many is little confusing.. I have a question thread in the fuel system forum,, just no one has answered yet... i did order some 6an braided line and some fittings but dont know if they are going to work or not till I get them 
Thread Starter
On The Tree
Joined: Feb 2009
Posts: 130
Likes: 0
From: san antonio tx
I did however get some mail..
I got the fitting to the back of the intake for the brake booster vaccum line, and a quick connect fitting to 6 an adapter to connect the vette filter to the braided line I got once again sorry for no pics.. should post some by friday, now I got to go pick up this 46k pounds of dog food
Thread Starter
On The Tree
Joined: Feb 2009
Posts: 130
Likes: 0
From: san antonio tx
here some pics of the fittings I bought,, also recived my 6 an braided line and more fittings.. sorry but still trying to figure a way to post some install pics,,, but they are huge like 2.5mb and cant seem to make it small enough to post
one is the hard to get vette filter to 6 an quick connect fitting, one the vacuum hose from brake booster to back of the intake, and one is a 6 an to 6 an , ,
one is the hard to get vette filter to 6 an quick connect fitting, one the vacuum hose from brake booster to back of the intake, and one is a 6 an to 6 an , ,