2001 porsche 996 ls1 conversion
Thread Starter
8 Second Club
iTrader: (1)
Joined: Nov 2001
Posts: 3,697
Likes: 1
From: the not so stock tribe
you are right , the cost of the tranny is pretty high , but its not rediculously high .
well i managed to clean the engine compartment yesterday, its amazing what a wire brush can do
i still have a few spots left that have some gooey gunk i have to scrape off but its pretty much ready to be painted .
i also took the rear inside carpet that was melted from the fire and found a little nasty surprise ,,, lets say i have to scrape and clean some more in there
( sorry no pics , forgot the camera )
i also ordered the missing suspension stuff , should see it in a week or so .
i have to get some kind of adhesive insulation to stick in the engine compartment , and i guess i could start the mockup process now
well i managed to clean the engine compartment yesterday, its amazing what a wire brush can do
i still have a few spots left that have some gooey gunk i have to scrape off but its pretty much ready to be painted .
i also took the rear inside carpet that was melted from the fire and found a little nasty surprise ,,, lets say i have to scrape and clean some more in there
( sorry no pics , forgot the camera )i also ordered the missing suspension stuff , should see it in a week or so .
i have to get some kind of adhesive insulation to stick in the engine compartment , and i guess i could start the mockup process now
Thread Starter
8 Second Club
iTrader: (1)
Joined: Nov 2001
Posts: 3,697
Likes: 1
From: the not so stock tribe
made some progress today , i took out the rear carpet ( fire damaged ) and found a little nasty surprise underneath it; i found a puddle ( still wet) of melted foam insulation - it had the consistancy of tar.
needless to say it was fun removing that stuff with napkins
here is a before pic :
and after it was done ( still needs another coat and then some insulation ):
i also finished cleaning and prepping the engine compartment , should be ready to paint next time
i also have a pretty good idea how the engine cradle will be , it will utelize the stock engine mount location and wrap under the engine and attatch to the existing removable crossmember. the engine will use vette style engine mounts that will attatch to the cradle. that way all i have to do to remove the engine is unbolt the cradle and the xmember (6 bolts ) and the engine drops down just like the original did .
i should have the tubes bent and ready to be welded and installed by saturday i hope
needless to say it was fun removing that stuff with napkins
here is a before pic :
and after it was done ( still needs another coat and then some insulation ):
i also finished cleaning and prepping the engine compartment , should be ready to paint next time
i also have a pretty good idea how the engine cradle will be , it will utelize the stock engine mount location and wrap under the engine and attatch to the existing removable crossmember. the engine will use vette style engine mounts that will attatch to the cradle. that way all i have to do to remove the engine is unbolt the cradle and the xmember (6 bolts ) and the engine drops down just like the original did .
i should have the tubes bent and ready to be welded and installed by saturday i hope
Last edited by 1dirtyZ; Mar 9, 2010 at 03:52 AM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
12 Second Club
Joined: Oct 2005
Posts: 218
Likes: 0
From: Toledo
I see it was a 996 turbo car. It would be cool if you did a gt2 rear wing, it would also save weight. A factory 996 wing is rather heavy because of the motor that pushes it up and all the compenets.
Thread Starter
8 Second Club
iTrader: (1)
Joined: Nov 2001
Posts: 3,697
Likes: 1
From: the not so stock tribe
ep , the trans will most likely be what came originally on these cars ; the G96/50 six speed.
v8rumble , i'm not so sure about the second one
67maro, the wing/decklid is heavy and i do agree , a GT2 wing would be the way to go , but right now the priority is getting the car running , then refining it , then getting it to look good
and to all you asking , it cost me about 10 grand to get the car.
v8rumble , i'm not so sure about the second one
67maro, the wing/decklid is heavy and i do agree , a GT2 wing would be the way to go , but right now the priority is getting the car running , then refining it , then getting it to look good
and to all you asking , it cost me about 10 grand to get the car.
