67 Camaro ignition switch wiring?
#1
Staging Lane
Thread Starter
iTrader: (2)
Join Date: Sep 2009
Location: Dallas, Texas
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
67 Camaro ignition switch wiring?
I searched and I can't seem to find anything specifically addressing this subject. I am using a new harness from Current Performance and my orginal under dash harness and ignition switch. I have started the engine by connecting the pink wire manually, but can't figure out how to integrate this to work with my factory switch and under dash harness?
I've included a picture of the factory switch and the wires plugging into it. Any suggestions would be most appreciated. Thanks!
I've included a picture of the factory switch and the wires plugging into it. Any suggestions would be most appreciated. Thanks!
#3
Ign switch wiring
Use your original ign switch to control a relay (or relays) which can then control whatever you need. This takes the load off of the switch and puts it on the relays. I believe that it's done this way on a factory LS harness. Study the factory diagrams found on this site.