RCR Superlite Coupe build
Very nice. what is the length from the Center of the axle to the front of the accessories..? I was considering doing something crazy with a setup that that... my secret sleeper project.. (one day I'll get it started).
Thread Starter
Teching In
Joined: Apr 2010
Posts: 11
Likes: 0
I should have mine ready to drive by fall. The two pictures of the finish car are of the shop car at RCR. I'll get some pics of mine, I made naca ducts under the doors on mine to duct air to transmission oil and engine oil coolers. I fabricated the rear clip hinge and gas strut attachment points and front clip hinge, along with other stuff.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
Teching In
Joined: Apr 2010
Posts: 11
Likes: 0
From the front of the engine to axle center is 36". From axle center to the rear of the transaxle is 20.5"
Thread Starter
Teching In
Joined: Apr 2010
Posts: 11
Likes: 0
It's not really a kit, when I think of a kit, Factory Five is what I see. There are 28 of these at this time. It comes as a roller, doors not hinged, body sitting on the frame and wheels and tire. All of the fluid and gas lines have to be run, complete wiring, and a lot of body cutouts. No engine or trans axel. The body is gelcoated to your color preference. $43k
Thread Starter
Teching In
Joined: Apr 2010
Posts: 11
Likes: 0
LED tail lights Doe's anyone know of a site with a good assortment of LED tail lights. I need some 4' round and 4 1/2" round tail lights. I really like the 2005 and up Corvette tail lights, but they are so damn expensive. Thanks, Al
Teching In
Joined: Jun 2010
Posts: 18
Likes: 0
From: Texas
ebaker,
Go to the GT40s.com forum and to the RCR sub-forum. There is a "sub" sub-forum devoted to the SLC. There are now over fifty being build and several now on the road. Two notable SLCs are being campaigned, one will be at the 25 hrs @ Thunderhill this year. The factory SLC just won the SuperUnlimited class at NASA for 2011.
Go to the GT40s.com forum and to the RCR sub-forum. There is a "sub" sub-forum devoted to the SLC. There are now over fifty being build and several now on the road. Two notable SLCs are being campaigned, one will be at the 25 hrs @ Thunderhill this year. The factory SLC just won the SuperUnlimited class at NASA for 2011.
Thanks cantdrive55, I've already joined up on GT40s.com forum and have started my own questions thread. I'm thinking about building mine as a RHD car for the Texas Mile in a few years. What part of Texas are you from? I'd love to make a trip to check out your car.
tail lights I have 4 tail lights out of an 87 Corvette, they are about 4 or 4.5 inches in diameter, I'll measure them tomorrow if you're interested, make me an offer. They have about 30k miles in them.
