Custom pully needed
Thread Starter
Teching In
Joined: Dec 2003
Posts: 18
Likes: 0
Custom pully needed I am trying to find some information or suggestions for an article, on a person or company that can either make or sells a DUAL pulley for an LS1. To explain this is a for a Corvette LS1 that has been modified and installed in a KitCar. We need to power an accessory not normally added to the engine and we would like to create a "Slave" system where an accessory such as a PS pump or Alternator has the standard pulley size but is extended further out with ANOTHER pulley where we can wrap a belt around to power another accessory. Kind of like a "piggy back" system. To best describe what I am taling about it is like the Crank Pulley that powers two belts, but we would like to have this on another accessory unless someone makes a 3 belt Main. Thanks in advance and please feel free to email me directly at jjones@kitcarmagazine.com
Launching!
Joined: Dec 2003
Posts: 210
Likes: 0
Originally Posted by John B
If the car doesn't have A/C just use the existing A/C belt location off of the crank to drive your slave.
