5.3 in 70 gto
Thread Starter
Registered User
Joined: Jul 2010
Posts: 3
Likes: 0
5.3 in 70 gto i have a 5.3 out of a 02 suburban that i want to put into my 70 gto, i want to put an ls1 intake on it, and i know that the accessory drive will have to be changed, but im not sure what to use, i want to run p/s and a/c, any help would be greatly appreciated. and im on a limited budget so no high doller billit kits for me. thanks
All i did on mine was chop off the alt mount part on the ps/aly mount and relocate the alt to the pass side worked pretty good u still gonna use the drive by wire setup?
http://sphotos.ak.fbcdn.net/hphotos-..._6486159_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._6486159_n.jpg
Thread Starter
Registered User
Joined: Jul 2010
Posts: 3
Likes: 0
its cable drive, what did you use to relocate the alt? i like that set up you have. ive read that the stock a/c location will hit the frame on the a body, any ideas? whats yours going in? r you gonna run a/c?
I just pulled off the stock idler and the bottom bolt on the alt will go into 1 of the old idler holes and made a adjustable bracket for the top. Mines goin in a camaro with vintage air u cant use the newer ac compressors (something with variable output????) so i bought a sanden off a 90 corrado and gonna move it closer to the block with a custom mount.
