-TheBandit-

iTrader: (1)

If you relocated your coils to someplace other than the valve covers, where did you relocate them to and how? Any pictures would be appreciated!

Thanks

thebigkeebler

in the trans tunnel use regular wire and can get ends from msd to put on the coil side of the wire , can get you the part number tomorrow it is at work. I don't know if there is enough room to run the wires under the manifolds on a stock set up I run shoties on my 67 camaro and there is plenty of room

Jimbo1367

IIRC...someone on here recently posted ... they put the coils in his glovebox

Pocket

iTrader: (22)

Moved mine to the frame rail to clear a blower. Custom bracket made from angle iron. Needed a 10" extension which i made from JY connectors

Marcello7x

iTrader: (10)

The part numbers for the wires would be awesome to know. I need to relocate mine, but have no clue where i want/can put them.

Pocket

iTrader: (22)

Those are stock Z06 wires

Most people buy a SBC kit with the vortec/LT1 boots

thebigkeebler

just use a universal wire and put the msd 3304 end on it coil side of the wire come 2 per pack