79 T/A to LS1/A4
http://www.youtube.com/watch?v=tKEp8FNsP38
time for it to come back out, i think its got a rod knock.....
time for it to come back out, i think its got a rod knock.....
was a rod knock, possibly two rods..... but new block and back in I got this now! hopefully it moves tomorrow in the daylight.... neighbors dont appreciate the open headers....
Basically done, I think I'm done working on it til I return from Iraq, leaving in two weeks so I got my one drive and roads see snow now so its parked, just doing the brakes as thy are too soft and other small things
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
TECH Fanatic
Joined: Jan 2010
Posts: 1,343
Likes: 2
From: South of Augusta,GA
http://www.youtube.com/watch?v=tKEp8FNsP38
time for it to come back out, i think its got a rod knock.....
time for it to come back out, i think its got a rod knock.....
yeah got the car tagged, and running great.... only problem Im having now is when I first step on the gas, it kinda stumbles a little bit.... then it really goes, but I found out one of the wires for the converter lockup switch was unplugged..... so might just be that, scanned it and said the injector had an open circuit, which I found one unplugged? dont know how that happened....but its fixed, also came up with a MAF code, so dont know if its done or what..... had to replace a leaking axle seal and bearing, and havent bled the brakes to get it on the road again, doing that tonight then hopefully its all good to go.... as theres a big show in Saratoga, NY in two weeks... which Im going to, and hopefully can drive the car up.... but all in all runs good and strong, gonna hook up some digital autometer gauges that are going to be hidden mounted in the factory radio delete plate, but other than that Im doing small fixes on some thing.... but thanks for asking heres some updated pictures...
Yeah, those are some older pictures, its been cleaned up just a bit more.. looks better, tucked the wires, put some more interior parts in it, etc.... wheels are 20x9 on the back, and 18x8.5 in the front, gotta lower it some more, so Im going with some coil overs, once I determine which ones to get.... then the back needs brought down about an inch to an inch and a half... then the stance will be perfect....
Thanks
Drove it 9hrs to Saratoga springs, NY for a show.... runs great no problems or hiccups! and moves like no other... average speed was 97mph.... only went through 23 gallons of gas one way! not bad at all! Driving home tomorrow! Wish I didnt have to work monday or id just keep driving!