02 sensor wiring issues
Thread Starter
TECH Addict
iTrader: (70)
Joined: Sep 2003
Posts: 2,525
Likes: 2
From: Springfield IL
02 sensor wiring issues Dilemma- I'm trying to wire an O2 sim into my downstream O2 sensor on my 1997 XJ to get rid of the code. I've been putting this off for two years now because the diagrams don't match up, so I figured I'd ask here
Heating elements are simple, but the catch I'm running into is the Jeep has "Downstream O2 sensor signal(tan/black)" and "sensor ground(brown/yellow)", where the LS1 diagrams have "downstream O2 sensor High(purple)" and "downstream O2 sensor low(tan)"
Which way do I wire it up? The arrows on the schematic lead me to believe low signal on the LS1 and Sensor Signal on the jeep FSM diagrams are the same wire, while high on the LS1 is considered ground. Am I right, or is my thinking backwards?
Thanks ya'll!
Heating elements are simple, but the catch I'm running into is the Jeep has "Downstream O2 sensor signal(tan/black)" and "sensor ground(brown/yellow)", where the LS1 diagrams have "downstream O2 sensor High(purple)" and "downstream O2 sensor low(tan)"
Which way do I wire it up? The arrows on the schematic lead me to believe low signal on the LS1 and Sensor Signal on the jeep FSM diagrams are the same wire, while high on the LS1 is considered ground. Am I right, or is my thinking backwards?
Thanks ya'll!
