cs 130 conversion LS1 harness
Thread Starter
Teching In
Joined: Jan 2011
Posts: 7
Likes: 0
From: Tallahassee
cs 130 conversion LS1 harness 
Hey all, Ive searched the stickies and post but cannot find my answer so maybe someone here can help me. I have dropped a 00' LS1 from a WS6 into my 68 Firebird coupe. I have yet to order my harness as I want to do that last, still have to run transmission lines, drive shaft and myriad of other ankle biters. I am currently trying to square away the factory wiring and am down to removing the voltage regulator and prepping the wiring to accept the harness and the car the cs130 alt. I have read 1000 posts on the inet and none are exactly what I am facing... The blue wire and white wire are on the regulator plug (cut) but nowhere in the factory harness (the car had the factory 350 and an SI alt), The new cs130 has a 4 pin connector and I have no idea how to pair my existing wiring to the 4 pin cs130. I had removed the factory idiot lights and bezel and have been running all electric autometer guages.Thanks for any help,
Mike
Joined: Dec 2001
Posts: 12,829
Likes: 30
From: Central Indiana Honors: 4th grade spelling bee contestant
I moved this to the Conversions & Hybrids forum since it's a "godsend" when it comes to conversions! I have gotten lots of help there!
Thread Starter
Teching In
Joined: Jan 2011
Posts: 7
Likes: 0
From: Tallahassee
