4L60E TCC lockup switch control?
#1
TECH Fanatic
Thread Starter
4L60E TCC lockup switch control?
I am in the midst of rebuilding the wiring harness for the GTO and have run into a bit of a quandry. I need to come up with a clean way to activate the TCC lockup control. I looked at retrofitting a late style stoplight switch but it just does not seem practical. What is the most common wat to do this?
#2
TECH Fanatic
iTrader: (7)
Go here and look at page 9
http://www.hotrodlane.cc/Instruction...ingharness.pdf
Or here on page 11
http://www.painlessperformance.com/Manuals/60218.pdf
http://www.hotrodlane.cc/Instruction...ingharness.pdf
Or here on page 11
http://www.painlessperformance.com/Manuals/60218.pdf
#5
LS1Tech Sponsor
iTrader: (5)
We offer a switch with a pigtail that will thread into stock location. $17. PM me for details.
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
#6
TECH Fanatic
Thread Starter
Thanks for the ideas. I have been tryng to out think this whole thing. The plan of using an OEM cruise control stop light switch came to mind early, but I had convinved myself that it would not work. I even have the switch to operate the DBW cruise all set up and ready to go.