Conversions & Swaps LSX Engines in Non-LSX Vehicles
Sponsored by:
Sponsored by:

ls1 240sx Power Steering Issues

Thread Tools
 
Search this Thread
 
Old Jun 17, 2011 | 06:35 AM
  #1  
lq4240sx's Avatar
Thread Starter
Staging Lane
 
Joined: Aug 2010
Posts: 69
Likes: 0
From: NC
Question ls1 240sx Power Steering Issues

Ok I have an lsx swap in my s13. The stock rack went out shortly after I started racing it and while racing it felt like it had too much assist. I was good beforehand so I figured it was over flowing the rack. I made a restrictor (%50 smaller) and put it inline on the pumps high presure side. Then I got a new rack, went racing, and the same thing happened again. I was wondering is anybody else had this iproblem or knows the fix?
I'm changing racks, on racks, on racks!
Reply
Old Jun 17, 2011 | 08:07 PM
  #2  
S10xGN's Avatar
TECH Junkie
iTrader: (11)
 
Joined: Jul 2005
Posts: 3,782
Likes: 7
From: Port Neches, TX
Default

Originally Posted by lq4240sx
Ok I have an lsx swap in my s13. The stock rack went out shortly after I started racing it and while racing it felt like it had too much assist. I was good beforehand so I figured it was over flowing the rack. I made a restrictor (%50 smaller) and put it inline on the pumps high presure side. Then I got a new rack, went racing, and the same thing happened again. I was wondering is anybody else had this iproblem or knows the fix?
I'm changing racks, on racks, on racks!
Try one of these, they've been field tested...
Reply




All times are GMT -5. The time now is 12:26 AM.