o2 sensors
o2 sensors hello LS1Tech Family. Im at the end of converting my 5.3 dbw harness to dbc, in a standalone fashion. Whats up with the wiring of the 02 senors. I know there are two types, isolated ground and case ground. I also know that pins Blue 26,29 and Blue 66,69 are low and high signals thats connected to pcm. Everyone knows that the o2 sensors have switched power, so what next.
One wire is left to be connected to what and where? Also lets not forget that these connecters in a certain order on the O2 sensors A,B,C,D and what O2 sensors r used? If anyone can help me out thanks in advanced.
One wire is left to be connected to what and where? Also lets not forget that these connecters in a certain order on the O2 sensors A,B,C,D and what O2 sensors r used? If anyone can help me out thanks in advanced.
Which PCM are you using, GREEN/BLUE or RED/BLUE?
__________________
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
Your Source for LSX Conversion Parts!
www.psiconversion.com
Ebay Store
Facebook/psiconversion
Instagram/psiconversion
'Dont Let EFI Pass You By!'
