dbw help please. accel pedal isnt doing anything
#1
dbw help please. accel pedal isnt doing anything
I have a dbw system off a 2005 cadillac escalade, and pcm from the same truck. the accelerator pedal is not responding.
The car starts up and idles. the app plug is getting 5V on the pins G (white/black) and B (purple). the throttle body motor is getting 5V at pins H and E.
while the car is running, if i unplug the tac, i dont hear a change in engine noise. when i plug it back in, i hear a slight change and back to the normal engine noise.
while the engine is not running, and key is in the on position, i can manually move the throttle blade.
any help please :[
The car starts up and idles. the app plug is getting 5V on the pins G (white/black) and B (purple). the throttle body motor is getting 5V at pins H and E.
while the car is running, if i unplug the tac, i dont hear a change in engine noise. when i plug it back in, i hear a slight change and back to the normal engine noise.
while the engine is not running, and key is in the on position, i can manually move the throttle blade.
any help please :[
#2
I have a dbw system off a 2005 cadillac escalade, and pcm from the same truck. the accelerator pedal is not responding.
The car starts up and idles. the app plug is getting 5V on the pins G (white/black) and B (purple). the throttle body motor is getting 5V at pins H and E.
while the car is running, if i unplug the tac, i dont hear a change in engine noise. when i plug it back in, i hear a slight change and back to the normal engine noise.
while the engine is not running, and key is in the on position, i can manually move the throttle blade.
any help please :[
The car starts up and idles. the app plug is getting 5V on the pins G (white/black) and B (purple). the throttle body motor is getting 5V at pins H and E.
while the car is running, if i unplug the tac, i dont hear a change in engine noise. when i plug it back in, i hear a slight change and back to the normal engine noise.
while the engine is not running, and key is in the on position, i can manually move the throttle blade.
any help please :[
How does it idle? is it lower than it should?
My DBW TB just went out on me, it starts but the pedal does nothing, if i floor it, it kinda changes the idle. But ever since the TB broke it idles very low
#3
http://www.youtube.com/watch?v=ChPds...el_video_title