Vss question
Thread Starter
On The Tree
Joined: Aug 2011
Posts: 151
Likes: 0
Vss question I am about done with a 5.3l/th350 swap into a 79 3/4 ton 4x4, and one thing I have left to do is my vss that was left in the harness and ECM flash.
The wires coming off the harness, (two twisted pair) and the two off this sensor (http://m.summitracing.com/parts/DAK-SEN-01-1) are different colors... How do I know which wires need to match? Or does it matter?
Thanks in advance
The wires coming off the harness, (two twisted pair) and the two off this sensor (http://m.summitracing.com/parts/DAK-SEN-01-1) are different colors... How do I know which wires need to match? Or does it matter?
Thanks in advance
Thread Starter
On The Tree
Joined: Aug 2011
Posts: 151
Likes: 0
Thread Starter
On The Tree
Joined: Aug 2011
Posts: 151
Likes: 0
dakota digital black wire, goes to the green/black stripe vss wire. low side like said above goes to the black wire on vss. then obviously other wire goes to the last one.
