Engine harness help
Thread Starter
12 Second Club
Joined: Aug 2006
Posts: 286
Likes: 0
From: St.Peters Mo
Engine harness help Going to a LS motor in my 96' LT1 and im in the process of yanking the motor and harnes today, there is a purple wire with a white stripe that runs from the driver side to the connector for the optispark on the passenger side of the intake. does that wire disconnect any where or do i just need to un-pin it at the location.
If its outside of the harness, then its a repair or add-on. What difference does it make when doing a LS1 swap in a 4th gen
Repin the body connectors on the pass fenderwell and plug a 98-02 Fbody engine harness in directly
Repin the body connectors on the pass fenderwell and plug a 98-02 Fbody engine harness in directly
Correct, the only other ppl/wht wires in the entire are for the drivers HO2s. Point being it its external, its either an add-on or a mod, neither make the first bit of difference for a LSx swap as the whole harness is being removed
